Printed Bus Flooring

  • Code:
    DZINER CHIPS
  • Material:
    Vinyl Flooring
  • Brand:
    WonderFloor
  • Units:
    SFT
Baltic Blue
Drappled Grey
Red
Strom Blue
Super Beige
Super Green
Super Terracotta
Colors shown here for indicative only. Actual shade may vary from shown above.

Note: Please select the required quantity to ADD the product to CART.

Wonderfloor manufacture this special floor covering with high abrasion resistance for areas where there is heavy foot fall. It is manufactured with random Chips and Carborundum (Silicon Carbide). Our safety flooring matches all the international quality requirements. These are mainly used as transport flooring, but can also be used in other areas

These are special floor coverings embedded with Silicon Carbide (Corundum) grains on the top surface which provide very high slip resistance rating.  Due to a superior PVC content and Silicon Carbide Grains, these floorings are able to withstand very high abrasion and are most suitable for areas where there is heavy foot fall & anti-slip properties are required like: Buses, Trains, Ramps, Wet Areas, etc.

TRACTION safety floorings are normally produced with a smooth A surface finish, however for enhanced slip resistance they are produced with an embossed surface finish from our “Matrix” range. For aesthetic properties these floorings are also embedded with multi coloured Polymer chips.

Salient Features

  • Produced as per ISO requirements and with Fire & Smoke emission requirements which are most important for the transport industry.

  • Product is “T “ rated due to it very high abrasion resistance properties.

  • Slip Resistance of R11 or R12 can be achieved depending upon the top embossing selected.

  • Available in Plain colours or with Multi Coloured Chips

  • Also Available with Glass Scrim Reinforcement for very high Dimensional Stability.

  • Suitable for the transport sector like Buses, Trains, Lifts, Loading Ramps, Walk ways, Wet Areas, etc.

  • Thickness available 1.30mm

  • Roll dimension – 2 mtr x 15 mtr

BRAND:  D' Ziner Chips

CATEGORY: COMMERCIAL

TYPE: Bus Flooring

THICKNESS: 1.30 MM

ROLL WIDTH: 2.00 MTR

LENGTH PER ROLL : 15 METERS.

TOTAL SQFT PER ROLL : 323

RECOMMENDED AREA OF USAGE: Suitable for the transport sector like Buses, Trains, Lifts, Loading Ramps, Walk ways, Wet Areas, etc.

Related Products

  • Adventus
    Adventus
  • ANSTAT
    ANSTAT
  • Trendo
    Trendo
  • Anti Skid Embossed Flooring
    Anti Skid Embossed Flooring
  • Hospital Flooring
    Hospital Flooring
  • Sports Flooring
    Sports Flooring
  • Bravo Sports Flooring 4500mm
    Bravo Sports Flooring 4500mm
  • Orbit
    Orbit
  • School Flooring
    School Flooring
  • Semi Commercial
    Semi Commercial
Scroll To Top