Wonderfloor manufacture this special floor covering with high abrasion resistance for areas where there is heavy foot fall. It is manufactured with random Chips and Carborundum (Silicon Carbide). Our safety flooring matches all the international quality requirements. These are mainly used as transport flooring, but can also be used in other areas
These are special floor coverings embedded with Silicon Carbide (Corundum) grains on the top surface which provide very high slip resistance rating. Due to a superior PVC content and Silicon Carbide Grains, these floorings are able to withstand very high abrasion and are most suitable for areas where there is heavy foot fall & anti-slip properties are required like: Buses, Trains, Ramps, Wet Areas, etc.
TRACTION safety floorings are normally produced with a smooth A surface finish, however for enhanced slip resistance they are produced with an embossed surface finish from our “Matrix” range. For aesthetic properties these floorings are also embedded with multi coloured Polymer chips.
Salient Features
Produced as per ISO requirements and with Fire & Smoke emission requirements which are most important for the transport industry.
Product is “T “ rated due to it very high abrasion resistance properties.
Slip Resistance of R11 or R12 can be achieved depending upon the top embossing selected.
Available in Plain colours or with Multi Coloured Chips
Also Available with Glass Scrim Reinforcement for very high Dimensional Stability.
Suitable for the transport sector like Buses, Trains, Lifts, Loading Ramps, Walk ways, Wet Areas, etc.
Thickness available 1.30mm
Roll dimension – 2 mtr x 15 mtr
BRAND: D' Ziner Chips |
CATEGORY: COMMERCIAL |
TYPE: Bus Flooring |
THICKNESS: 1.30 MM |
ROLL WIDTH: 2.00 MTR |
LENGTH PER ROLL : 15 METERS. |
TOTAL SQFT PER ROLL : 323 |
RECOMMENDED AREA OF USAGE: Suitable for the transport sector like Buses, Trains, Lifts, Loading Ramps, Walk ways, Wet Areas, etc. |